Scope of Work

Vent Sizes

Question: 

I have mono trusses on either side of a firewall. I have the fire rating/wall material between them. Can I place a ridge vent above these two? Or should I use vents? How do I calculate the appropriate vent sizes and styles?

T-bracing

Question: 

The truss industry maintains that the design of truss roof and floor system permanent bracing is the responsibility of the building designer. System permanent bracing covers the entire structure and all bracing element interactions.

Attachment Of Scissors Trusses

Question: 

What is the correct method of attaching scissors trusses to the top plate? I read recently in a trade magazine that this type of truss should be toe-nailed on one end and attached with slotted clips on the other end. According to the article, this is to allow for movement of the truss. We require PE stamped spec sheets from the truss manufacturer to verify trusses meet wind and snow loads. These sheets give bracing requirements but never give recommended attachment requirements.

Design Responsibilities

Question: 

My company supplied roof trusses for a hotel project. The building inspector shut the project down because the trusses were not designed to account for additional snowdrift loading. The construction plans did not contain any snowdrift loading information. The architect is claiming it is our responsibility to determine drift loading, therefore we must fix the problem. Do you have any documentation to help us dispute the architect’s claim?

Truss Storage Responsibilities

Question: 

We have a customer that bought trusses in June. The trusses were shipped [ and one month later are] being set. The chords have weathered and bowed. What is the industry standard for dealing with this problem? What is our liability in this situation? We were not aware of any delays on the customer’s part and shipped as requested. Note: These trusses are 62 ft. scissor trusses.

Position Statement on Sealed Truss Placement Diagrams for the 2012 or 2015 IRC - Educational Program

This presentation provides information on sealed truss placement diagrams in relation to the International Residential Code.

Position Statement on Sealed Truss Placement Diagrams for the State of California (including Los Angeles) - Educational Program

This presentation provides inspection and quality assurance requirements for metal plate connected wood trusses.

Position Statement on Sealed Truss Placement Diagrams for the 2012 or 2015 IBC - Educational Program

This presentation provides information on sealed Truss Placement Diagrams for the 2012 or 2015 International Building Code.

Sealed Truss Placement Diagrams - Texas

It can be often misunderstood whether a Truss Design Engineer has the responsibility to seal a Truss Placement Diagram (TPD). The purpose of this Research Report is to provide the relevant code sections from the latest editions of the International Building Code (IBC) for thorough analysis and interpretation, as they relate to the state of Texas. 

Sealed Truss Placement Diagrams - IRC

It can be often misunderstood whether a Truss Design Engineer has the responsibility to seal a Truss Placement Diagram (TPD). The purpose of this Research Report is to provide the relevant code sections from the latest editions of the International Residential Code (IRC) for thorough analysis and interpretation.