Industry Timeline

From a South Florida Invention to a Worldwide Industry!

If you have a contribution you would like to make to this compilation, please send it to timeline@sbcindustry.com. Submissions will be subject to approval and may be edited for grammar, length and clarity.

1560-1580:

  • Italian architect Ande Palladio developed three forms of the basic truss element—the rigid triangle. These forms are believed to be the earliest examples of trusses used scientifically.

1840:

  • The Howe truss won a United States patent, and following Palladio’s work, became the earliest form of a simple truss created for long-span bridge construction.

1844:

  • Thomas W. Caleb Pratt patented another combination wood and iron bridge truss. This truss differed from the Howe with diagonal webs of iron (for tension) and verticals made of wood.

1952:

  • A. Carrol Sanford invented the metal truss plate with teeth called the Gri-P-Late.

1955:

  • Sanford’s Gri-P-Late thrilled Miami building officials, and he was issued the first Engineered Bulletin for his product by the Architectural Standards Division of the Federal Housing Administration on July 13.
  • J. Calvin Jureit, founder of Gang-Nail Systems Inc. (now MiTek Industries), created the Gang-Nail plate, the first metal connector plate for trusses that did not need supplemental nail fastening. The plates were pressed into the lumber using a concrete vertical hydraulic press and steel table precision jigs.

1958:

  • Klaisler Manufacturing opened its doors as one of the first truss roller manufacturers.

1959:

  • CLT Continuous Lumber Tester invented at Potlatch Forests, Lewiston, ID. Patented by Harold Keller.

1960:

  • The Truss Plate Institute (TPI) was formed. Cofounder J. Calvin Jureit served as president for the first two terms. Ed Callahan, P.E. of Gang-Nail was the first full-time managing director of TPI, then located in Washington, D.C.
  • After formulation began in 1959, TPI-60, “Design Specification for Light Metal Plate Connected Timber Trusses,” was published by TPI.

1961:

  • Jack Schmitt founded Truswal Systems Corp.
  • The Component Manufacturers Council (CMC) was established as a committee of TPI. Jack Littfin served as the first CMC president.

1962-65:

  • Bill Juriet expanded the plated truss to Canada, Europe, UK, South Africa, Australia and New Zealand.

1964:

  • The roller gantry was invented by Jim Pool, an engineer who worked for Carrol Sanford. With the help of Dick Stoddard, a Canadian fabricator, they perfected this roller gantry in 1964.

1965:

  • Transverse vibration E-Computer invented at Washington State University and patented by James D. Logan and Roy F. Pellerin.

1966:

  • Alpine Engineered Products was founded by William McAlpine and Charles Harnden in October of this year.

Late 1960s & Early 1970s:

  • In 1970 the first total truss software package-Auto Truss-was developed by Jack Palacio and Mike Tellechea for Gang-Nail Systems and in 1971 it became the first computer program offered to customers via time-sharing. Within a few years, these programs were converted to run on IBM 1130 computers, and other truss plate manufacturers followed Gang-Nail’s lead.
  • Robert Brooker developed the first truss engineering computer software package sold with the computer source code, based on TPI’s 1974 design criteria.
  • Truss plate manufacturers provided truss manufacturers with Computer Aided Design (CAD) capabilities and the option to handle truss design in-house. On-Line Data, Inc., created by truss plant owner and operator Dan Hurwitz, P.E., is one early example of this timesharing service.
  • Development of Laminated Veneer Lumber and introduction of Micro-Lam product by Trus Joist.

1970:

  • Jack Schmitt invented the 4x2 parallel chord truss, most commonly used as a floor truss.
  • American Lumber Standards Committee voted to change lumber sizes. 2x4 changed from 1-5/8" x 3-5/8" to 1-1/2" x 3-1/2". These changes required all trusses to be re-engineered.

1971:

  • Gang-Nail Systems and Alpine developed the plated bowstring and monopitch trusses for mobile homes based on load test results.

1972:

  • Dr. Stanley K. Suddarth of Purdue University’s Wood Research Laboratory introduced the Purdue Plan Structures Analyzer (PPSA I & II), a computer truss design system that he developed for truss design research and problem solving.
  • Gang Nail Systems developed a new computer program, “Auto Plot,” which would generate a sealed drawing greatly enhancing the engineering turn-around time for its customers.

1973:

  • Carlos Rionda developed the “hinge plate” for Gang Nail Systems which solved the transportation height limitations and allowed for hi-pitch roofs for modular applications.

1974:

  • Metriguard develops stress wave testing systems for locating decay in wood structural members of all types and for evaluating particleboard products during production.

1975:

  • CMC became the Component Manufacturers Division (CMD) of TPI. Both TPI and CMD had boards and officers and there was a joint Board of Trustees.

1980:

  • First computer generated framing plan-Auto Roof-was introduced by Gang Nail Systems and was incorporated into the time-sharing Auto truss software family.
  • TPI sponsored the first BCMC show in Louisville, KY with 39 exhibitors. Heavy Equipment and Tabletop Sponsored Event.

1981:

  • Introduction of the first fire retardant treated lumber with low corrosivity in contact with truss plates (Dricon® fire retardant treated wood).
  • BCMC held in Reno, NV. Tabletop Sponsored Event.

1982:

  • Gang-Nail Systems introduced the first stand alone work station for truss design (the Sun Microsystem workstation) running mainframe identical truss software.
  • Simpson Strong-Tie Co. was independently approached by both Charlie Barnes and Staton Douthit. They encouraged Simpson to address truss connection concerns which led initially to the THA double shear nailed hangers and eventually to over 100 products de-signed for the truss industry.
  • BCMC held in Louisville, KY. Heavy Equipment and Tabletop Sponsored Event.

1983:

  • CMD passed a motion to separate itself from TPI in April. Staton Douthit was the current president.
  • CMD had an origination meeting in May and the Wood Truss Council of America (WTCA) was formed.
  • BCMC held in Anaheim, CA. Tabletop Sponsored Event.

1984:

  • Jim Gilleran of McCausey Lumber made a distribution agreement with Gang-Nail Systems to import Master Plank LVL from Finland for sale in North America. Later in the same year, GNS developed connector plate values and introduced, for the first time, LVL as truss chord material.
  • Marks the first year BCMC was co-sponsored by TPI/WTCA. From 1984-1991 the shows held on even years afforded exhibitors with facilities suitable for showing heavy equipment while shows held on odd years were tabletop displays.

1985:

  • Jerry Koskovich introduced the first automated component saw to the component industry.
  • Two educational videotapes, The Key to Quality Truss Configuration and Bracing and Erecting Wood Trusses became available to WTCA members for training.
  • The QC Manual was finalized and sent to members.
  • Smith, Bucklin & Assoc. of Chicago was selected as the new management company for WTCA. Henry Givray was named Executive Director.
  • The first issue of WOODWORDS (now SBC Magazine) was published in newsletter form for WTCA membership.
  • BCMC Theme: “Marketing and Management Strategies for a Changing Economy” held in Phoenix, AZ. Odd years from 1985-1991 were Tabletop shows. “Sold out” exhibit space included 33 exhibitors and over 500 attendees.

1986:

  • Jack N. Schmitt, inventor of both the floor truss and the metal web truss, was named WTCA’s first honorary lifetime member in recognition of his leadership in forming the association and for his outstanding contributions to the wood truss industry.
  • The ASTM E-119 fire endurance test successfully passed the one-hour rating on March 12 at the Gold Bond Research Center, Buffalo, NY. PFS Corporation of Madison, WI, conducted the inspection for parallel chord floor-ceiling trusses.
  • A Gallup Survey showed 85 percent of businesses that failed did not belong to trade associations. Trade association members reported lobbying and legislative work as the most valuable function of their association, followed closely by the associations’ ability to create a forum in which members can exchange information.
  • WTCA and the Southern Forest Products Association (SFPA) exchanged complimentary memberships in an effort to increase communication and representation among allied industry organizations.
  • Produced by Lenny Sylk, president of Shelter Systems in Hainesport, NJ, “The Great American Build-Off – The Housebuilding Race of the Century” was made to celebrate the company’s 20th anniversary in mid-September and prove that component home building is faster and more efficient than the once-conventional “stick” method for building homes.
  • The Truss Plate Institute (TPI) announced the appointment of John H. (Buddy) Showalter, Jr. to technical director.
  • Chuck Richardson of Richco Structures died on June 12. He was a past-president of the Component Manufacturers Council of the Truss Plate Institute (TPI), the predecessor of WTCA.
  • Lumbermate Company, St. Louis, MO, announced the development of a system that has successfully passed the requirements for a one-hour, fire-rated, roof/floor-ceiling assembly. The new assembly FR-System 1, consists of a single layer of gypsum board installed on wood trusses, incorporating the FR-Quik Channel Set. FR Quick’s self-centering and automatic-locating feature allows for quick installation.
  • MiTek Industries, Inc. (MII), parent company of Hydro-Air Engineering, Inc., St. Louis, MO, announced the purchase of The Panel Clip Company, Farmington, MI.
  • WTCA proudly announced the successful passage of the TPI/WTCA-sponsored “One-Hour Fire Endurance Test of Wood-Webbed Truss Floor-Ceiling Assembly” (PFS Test Report #86-10, Design FC 392).
  • Gang Nail Wood Products started production of LVL and I-joists sold through component manufacturers and expanded McCausey Lumber’s Master Plank LVL sales to satisfy demand.
  • New and improved bearing location, lateral bracing, concentrated load and warning tags were developed by WTCA and made available to its membership.
  • First two people were inducted into the WTCA Hall of Fame in recognition of outstanding and dedicated service to the industry.
  • Hall of Fame Inductee: Staton Douthit of Associated Truand- First president and primary organizer of WTCA.
  • Hall of Fame Inductee: Dr. Stanley K Suddarth, Wood Structures Researcher, Purdue University - Leader in the development of modern truss theory.
  • BCMC Theme "Managing Risk in ‘86” was held in Louisville, KY. Attendees: 1,240. Exhibitors: 45.

1987:

  • Revised editions of the TPI Interim Design Methodology for PCT-CII 4x2 Wood Trusses Supplement (PCT-80) and Interim Design Methodology for PCT CII2x4/2x6 Wood Trusses Supplement (TPI-85) became available.
  • John Ed Ryan, P.E., was named WTCA representative to the major code agencies, including the American Society of Testing Materials (ASTM).
  • The September/October issue of WOODWORDS was the first to contain advertising by WTCA Associate Members. First-time advertisers included Alpine Engineered Products, Eagle Metal Products, Hoover Treated Wood Products and TrusSteel Inc.
  • In 1987 WTCA membership increased over 20 percent or 73 members.
  • BCMC Theme: “Growth through Excellence” held in Las Vegas, NV. Sammy Davis Jr. and Shecky Green headline attendee cocktail show. Attendees: Exhibitors: 32.
  • Hall of Fame Inductee: Dave Chambers, TruTruss/Imperial Components - Past president of WTCA, recognized for his strong leadership.
  • Hall of Fame Inductee: Don Percival, Professor, Small Homes Council, University of Illinois - Leader in the development of modern truss theory.

1988:

  • The International Conference of Building Officials (ICBO), developers of the Uniform Building Code (UBC), voted to require installation of automatic fire extinguishing systems in buildings three stories or higher and with 15 or more dwelling units (apartments) or 20 or more guest rooms (hotel or motel rooms).
  • A task force on wood trusses urged WTCA to sponsor a voluntary standards program for in-plant quality control procedures for metal plate connected wood trusses. The result was the development of WTCA QC, an objective system of quality control procedures involving inspections of trusses and lumber, data recording and evaluation, culminating in the generation of reports that show the relative performance per inspection of trends occurring over time.
  • Dan Hurwitz of On-Line Data was appointed to the WTCA Board of Directors as the first associate member to serve on WTCA's executive body.
  • WTCA developed the WTCA jobsite poster for builders as their newest member service.
  • The MSR Lumber Producers Council was established to promote the benefits of Machine Stress Rated lumber for the purpose of increasing the usage and acceptability of the product with the truss industry specifically in mind.
  • WTCA Engineering Review Committee was established.
  • Gang-Nail Systems, Inc., Miami, FL, was purchased in a joint venture agreement by MiTek Industries, St. Louis, and Bowater PLC, Great Britain.
  • The WTCA board approved a revised dues structure, effective Jan.1, 1989. Members were to be classified into one of seven dues levels based on their manufactured component sales volume.
  • At the BCMC show, Alpine Engineered Products, Inc. introduced AutoSet®, the component industry’s first computer-contolled and automated truss jigging system.
  • BCMC Theme: “Systems Update” held in Nashville, TN. Computed-controlled automation makes its debut. New record attendance set: close to 850. Exhibitors: 47.
  • Hall of Fame Inductee: Don O. Carlson, Editor, Automated Builder Magazine - The “voice” and communication medium of the truss industry since its inception, via Automated Builder.

1989:

  • Edward E. Callahan P.E., Callahan Associates, Timonium, MD, was hired by WTCA to write the definitive manual on the truss industry entitled WTCA’s Handbook of Wood Truss Design and Construction.
  • The Western Wood Products Association (WWPA) celebrated its 25th anniversary.
  • WTCA member Alpine Engineered Products Inc., Pompano Beach, FL, acquired the business of Linkwood Truss Systems, Inc., Mansfield, TX and Lumbermate Co., St. Louis.
  • WTCA member Don Percival, professor of wood technology at the University of Illinois, was honored by the American Society for Testing Materials (ASTM) with the society’s Award of Merit.
  • Joe Ziemba replaced Henry Givray as Executive Director of WTCA.
  • On November 9, 1989, Kirk Grundahl, P.E., of Qualtim Technologies International, Madison, WI, met with Francis Brannigan to discuss the latter’s opposition to wood trusses. Brannigan is the author of several articles allegedly illustrating the poor performance of wood trusses in fire. The primary purpose of the meeting, according to Grundahl, was to open up a dialogue between Brannigan, a prominent representative of the fire fighting industry, and WTCA. Grundahl felt the meeting was constructive.
  • No show this year; BCMC switches from a fall show to a February show.

1990:

  • WTCA headquarters had been located at 111 E. Wacker Drive in Chicago. On December 1, WTCA headquarters moved to 401 North Michigan Avenue, Chicago, IL.
  • The CSP-78: Recommended Code of Standard Practice for Metal-Plate Connected Wood Truss Industry publication was officially retired by the WTCA Board.
  • The Past Presidents Council was appointed and will focus on long-range planning for WTCA.
  • The Board of Directors created the position of Director of Technical Services and unanimously appointed Kirk Grundahl, P.E., Qualtim Technologies International, Inc., Madison, WI, to the post.
  • Rene-Paul Lemyre invented Open Joist 2000, a glued finger jointed open web floor truss with a trimmable end detail. He was the first one to use finger joints in wooden trusses and also the first one to produce a floor truss with a trimmable end detail. Open Joist 2000 was introduced for the first time to the world at the 1993 BCMC show. Following this event, three truss manufacturers purchased a license to manufacturer Open Joist 2000 in North America.
  • Membership increased by 17 percent in 1990. WTCA boasted approximately 400 member companies.
  • BCMC held in Jacksonville, FL. Attendees: More than 100+. Exhibitors: 59. Attendees focus on fire retardant wood truss assemblies. The first CM roundtable is held to discuss insurance, workers’ compensation and equipment.
  • Hall of Fame Inductee: Leonard Sylk, Shelter Systems Group - Past president of WTCA, introduced industry and product promotions as WTCA’s primary purpose.
  • Hall of Fame Inductee: George Eberle, Lumbermate - Significant contributions to the industry.

1991:

  • WTCA President John Herring and Executive Director Joe Ziemba met with the Congressional Fire Caucus Chairman, Curt Weldon and Congressional Fire Service Institute (CFSI) Executive Director John McNichol to discuss WTCA’s nationwide role in educating the fire service industry about the performance of wood trusses in fire situations. The meeting was held in Washington, DC with hopes of overcoming misconceptions about truss construction performance.
  • The National Fire Protection Association (NFPA) Research Foundation initiated a research project to investigate the fire performance of engineered lightweight trusses and similar roof and inter-story systems. Kirk Grundahl, P.E. of Qualtim conducted the literature review and technical analysis.
  • A special committee consisting of members representing the Truss Plate Institute (TPI) and WTCA met in June to discuss how both organizations could communicate and work together more effectively for the benefit of the truss industry. It was decided that TPI would continue to serve as the technical arm of the truss industry and that WTCA would represent truss manufacturers and its concerns would revolve around marketing trusses and assuring all industry segments that trusses are designed, fabricated, delivered and installed correctly.
  • The PBS series Hometime ran a five part series starting on November 9, 1991 entitled “Home of the Future.” Working with several industries including WTCA, Hometime’s futuristic house incorporated advanced design concepts, technologies and materials such as trusses.
  • In the fall, WTCA published all of the design value changes for lumber that were being made due to in-grade testing. This work continued into the fall of 1992 when WTCA published a series of tables that took a look at the impact of the new lumber design values and the new design equations that were developed in the 1991 NDS® on truss spans. A complete package of information was provided showing the span capabilities of the old equations and old lumber design values, new equations and new lumber design values, and old equations and new lumber design values.
  • Truss Plate Institute (TPI) announced the availability of its newest document: HIB-91 Summary Sheet. The Summary Sheet was a support document for Commentary & Recommendation for Handling, Installing & Bracing Metal-Plate Connected Wood Trusses, HIB-91.
  • Florida’s Southwest Association (SA) and the South Florida Truss and Component Manufacturer’s Association (now SFWTCA) donated $2,000 each to WTCA’s Fire Education Video.
  • BCMC Theme: "Strength and Unity" held in San Antonio, TX. Exhibitors: More than 40.
  • Hall of Fame Inductee: John Mannix, WTCA Legal Counsel - Legal counsel to the truss industry for many years.
  • Hall of Fame Inductee: Bill Alcorn, Wood Structures - Important contributor and early organizer of WTCA.

1992:

  • Based on an idea that came out of the Marketing Committee, WTCA published the first edition of the Metal Plate Connected Wood Truss Handbook. The handbook development process began in 1988 with a draft manuscript by Ed Callahan, P.E. that was edited and recompiled by Kirk Grundahl, Pam Dinsmore and Jay Edgar. Certain individuals were especially dedicated to making this book possible:
    Robert Ward of Southern Components, Inc.; Will Eber of Dolan Building Materials, Inc.; Mike Bugbee of Simpson Strong-Tie Co.; Rip Rogers of Trussway, Inc.; Koss Kinser of Kintec Wood Truss Manufacturing, Inc.; John Herring of A-1 Roof Trusses, Inc.; Don Hershey of Imperial Components, Inc.; Steve Cabler of MiTek Industries, Inc.; Merle Nett of Richco Structures; Dan Hurwitz of On-Line Data, Inc.; A. Lane Vastine; Lee Vulgaris of Reliable Truss Co. Inc.; Lenny Sylk of Shelter Systems Group; and retired University of Illinois Professor Emeritus Don Percival.
  • At the WTCA Annual Meeting in Louisville, Weyerhaeuser contributed $3,000 to WTCA to help fund the forthcoming edition of the Metal-Plate Connected Wood Truss Handbook.
  • Tom Carbeck passed away on September 23 at the age of 51. He was the owner of Universal Building Components (UBC), 1986 President of WTCA and a lifetime member of the WTCA Top Chord Club.
  • Qualtim, Inc., Madison, WI became WTCA’s new management company. Kirk Grundahl, Qualtim’s founder and the current Technical Director of WTCA, was named Executive Director of the association.
  • BCMC Theme: "A Tradeshow with a Touch of 'Class'" held in Louisville, KY. Attendees: More than 900. Exhibitors: More than 40. Many more workshops and presentations are added for attendees.
  • Hall of Fame Inductee: Rip Rogers, Trussway - Past president of WTCA, led WTCA’s assumption of responsibility in technical areas.

1993:

  • Iowa Wood Truss Manufacturers Association formally became a chapter of WTCA. Ray Noonan of Cascade Lumber was selected as the first IWTMA President.
  • Safety in the Truss Plant II: Saw Safety videotape became available. It was produced by WTCA in cooperation with the Florida Lumber and Building Material Dealers Association (FLBMDA).
  • On August 23 Robbins Manufacturing Company acquired On-Line Data, Inc.
  • The Metal Plate Connected Wood Truss Handbook was completed.
  • The fire service educational video Metal Plate Connected Trusses: Fire Performance, Tactics and Strategy was finalized.
  • BCMC Theme: “Building the American Dream.” First show sponsored solely by WTCA. From this point forward, BCMC was a full equipment show. With 54 exhibitors, the show floor is sold out well before the opening.
  • Hall of Fame Inductee: Tom Carbeck, Universal Building Products - Past president of WTCA, awarded posthumously.

1994:

  • The U.S. Government began requiring that metric (system international) units be used in all federal construction projects.
  • OSHA standards protecting a worker’s head, face, eyes and feet were updated. Protective gear must meet standards adopted by the independent American National Standards Institute.
  • One year after the start of WTCA, in July 1994, the Northwest Wood Truss Fabricators Association (NWTFA) voted to become an official chapter of WTCA. Started in 1966 as the Western Washington Truss Fabricators Council, NWTFA was the first ever component manufacturer association.
  • Kent Pagel of Pagel, Davis and Hill replaced John Mannix, Jr. as WTCA’s legal counsel. Mannix held the position for 15 years and was responsible for all of the legal documentation necessary for the formation and development of WTCA.
  • BCMC Theme: “Manufacturing with Pride.” Attendance up 16 percent over previous year.
  • Hall of Fame Inductee: Michael Conforti, MiTek Industries - Guided WTCA and TPI into a close working relationship.

1995:

  • WOODWORDS moves to a 4-color/2-color magazine format, beginning with the January issue.
  • The Standard Practice for Metal Plate Connected Wood Truss Design Responsibilities (WTCA1-1995) was approved as an official WTCA document.
  • The National Design Standard for Metal Plate Connected Wood Truss Construction ANSI/TPI 1-1995 was completed to replace the TPI-85 as the basis for the design of MPC trusses.
  • BCMC Theme: “Connect with Technology.” The internet plays a role for the first time on the show floor.
  • Hall of Fame Inductee: Don Hershey, Imperial Components - Was a past president of WTCA for two terms.
  • Hall of Fame Inductee: Bill McAlpine, Alpine Engineered Products - Provided significant technical contributions to the industry.

1996:

  • The Chicago Area Truss Association formed in the Fall.
  • Framing the American Dream® took place at the NAHB Builder’s Show. Two identical 2,600 square foot homes were built—one conventionally framed, the other built with engineered components. The brochure and video entitled, What We Learned by Framing the American Dream®, detail what was learned about craftsmanship in component manufacturing.
  • BCMC Theme: “Discover the Change”
  • Hall of Fame Inductee: Lee Vulgaris, Reliable Truss Co., Inc. - Past president of WTCA, initiated the chapter concept, and worked to get sole ownership of BCMC for WTCA.

1997:

  • WTCA teamed up with the Building Systems Council of NAHB, the Canadian Wood Council and the Canadian Wood Truss Council in Framing the American Dream® II which took place at the NAHB Builder's Show.
  • The Texas Chapter was formed.
  • As of March 1, 1997 the National Highway Transportation Safety Administration (NHTSA) required ABS on all new truck tractors.
  • Henry Chambers died from leukemia on March 8. He was the founder and past president of Chambers Truss, Inc. of Fort Pierce, FL.
  • MiTek, Inc.’s Australian subsidiary, Gang-Nail Australia Ltd., acquired the truss connector division of Stanley-Bostitch Pty Ltd.
  • The Inland Empire Truss Fabricators Association became affiliated with WTCA.
  • Lenny Sylk of Shelter Systems accepted appointment to the U.S. Department of Commerce. He is a member of the Advisory Committee for Trade Policy Matters representing the Building Products Industry, with the position of consultant to the U.S. Department of Commerce.
  • Engineering Services Company (ESCO) renamed itself The Koskovich Company.
  • BCMC Theme: “Building Your Resources.” Truss Technician Training (TTT) and WTCA QC version 3.0 are debuted at the show.
  • Hall of Fame Inductee: Kirk Grundahl, Qualtim, Inc. - Executive Director of WTCA.

1998:

  • Building Components Magazine debuted. WOODWORDS became a members-only industry newsletter.
  • Charlie Harnden, co-founder and president of Alpine Engineered Products, Inc. passed away on January 22 in Ft Lauderdale, FL. He served three terms as president of the Truss Plate Institute and was an associate vice president and board member of the Florida Lumber & Building Material Dealers Association. He also served on the board of directors of the Florida Forestry Association and in 1992 was named as Automated Builders’ James R. Price Achievement in Housing award winner.
  • WTCA headquarters relocated to Madison WI.
  • As of March 1 the National Highway Transportation Safety Administration (NHTSA) required ABS on all truck trailers and buses with air brakes.
  • Deacom, Inc. introduces the first accounting and Enterprise Resource Planning (ERP) software designed specifically for the component industry. The software is fully compatible with the industry's leading engineering programs, allowing truss builders to easily integrate manufacturing, billing, inventory, labor tracking, and purchasing.
  • All Florida chapters donated 21 sets of trusses to Give Kids The World, totaling $110,000 worth of trusses.
  • The Colorado Truss Manufacturer’s Association became a chapter of WTCA.
  • The WTCA Ohio Chapter Association became a chapter of WTCA.
  • The Central Florida Component Manufacturers Association became a chapter of WTCA.
  • WTCA approved $25,000 in funding to the NAHB Research Center (NAHBRC) for 1999.
  • BCMC Theme: “Tomorrow’s Technology Today”
  • Hall of Fame Inductee: Robert L. Ward, Southern Components, Inc. - Past president of WTCA.

1999:

  • The WTCA Board took action to return WOODWORDS to its original magazine form.
  • The Allowable Stress Design (ASD) Metal Plate Connected Wood Truss Guideline was developed by WTCA with assistance from TPI.
  • WOODWORDS moves to a full 4-color magazine beginning with the June/July issue.
  • NAHB Fire Resolution Unites Industry Organizations: At its 1999 Spring Board meeting in May, the National Association of Home Builders (NAHB) published a document entitled NAHB Resolution on Restrictions and Bans on Wood Trusses and I-Joists. This resolution is an important step in uniting allied industry organizations to work toward greater public understanding of the economic and environmental benefits of using metal plate connected wood trusses, I-joists and other manufactured wood components, and to oppose the restriction or banning of these products due to misunderstanding of their performance characteristics under the siege of fire. Included in this joint effort are the Wood Truss Council of America (WTCA), the Wood I-Joist Manufacturers Association (WIJMA), the American Forest and Paper Association (AF&PA), APA-The Engineered Wood Association and other concerned parties.
  • After a six-year distributorship with Haulin Trailers and ASI Industry, A-NU-PROSPECT begins manufacturing their own roller trailers.
  • The first Turb-O-Web license was issued in the United States. Full time production of Turb-O-Web trusses commenced in Central Washington.
  • The Steel Truss & Components Association (STCA) was formed.
  • BCMC Theme: “Solutions 2000.” Exhibit space tops 57,000 square feet. The show hosts over 1,200 attendees representing 425 component manufacturer companies.
  • Hall of Fame Inductee: John R. Herring, SelectBuild - Past president of WTCA.

2000:

  • The Structural Building Components Council (SBCC) was formed, with representation from the Wood Truss Council of America (WTCA), the Steel Truss & Component Association (STCA), and the Structural Component Distributors Association (SCDA). The primary emphasis of SBCC is to create the best possible knowledge base with which to solve problems and create opportunities for the component industry.
  • The International Codes Council (ICC) created the International Building Code (IBC) to serve as a single model building code for the entire United States.
  • PATH created the Industry Steering Committee to guide housing research. WTCA was asked to be involved in the committee to provide a voice on behalf of its members. WTCA became the PATH Quality Working Group Co-Chair, the NAHB Building Materials Task Force and the NAHB Manufactured Housing Task Force.
  • In April the WTCA New York Chapter had their first meeting.
  • MiTek releases first “production ready,” automated Turb-O-Web design software in its v4.2.
  • BCMC Theme: “People Building the Future” Exhibitors exceed 100 (111) for the first time.
  • Hall of Fame Inductee: Thomas J. Manenti, MiTek Industries, Inc. – Past president of TPI and an advocate of a working relationship between WTCA and TPI.

2001:

  • The Carbeck Structural Components Institute (CSCI) was established as a non-profit organization to benefit the structural building components industry through research, development and education.
  • “National Housing Quality (NHQ) Certified Contractor Program” is released as an assurance system for wood framing contractors.
  • Brace the Temporary Bracing for Safety is released as the newest addition to the Truss Technology in Building (TTB) series.
  • A new employee recruitment brochure for the component industry entitled Is Building Component Design for You? is completed.
  • WTCA develops a Truss Technology Workshop (TTW) on Truss Plant Tours.
  • The first Annual Legislative Conference is held in Washington, DC.
  • Advanced Design Technology (ADT) and Viking Engineering announced that they were joining forces as a strong wall panel equipment provider in October of this year.
  • The Turb-O-Web system receives two US patents, #’s 6,176,060 and 6,249,972.
  • A small group of structural component distributors formed the Structural Component Distributors Association (SCDA) to represent the interests of companies that distribute structural components. Examples of these structural component products include I-Joists, LVL, Glue-Laminated beams, PSL and Trimmable-end Floor Trusses.
  • Facts Regarding Mold on Lumber is the newest addition to WTCA’s Truss Technology in Building (TTB) series.
  • WOODWORDS changed its name to Structural Building Components (SBC) Magazine in November of this year to more fully embrace the scope of the structural building components industry.
  • Four new TTB’s are released: How to Read a Truss Design Drawing, Truss Repair, How to Read a Truss Placement Plan and Commentary for Always Diagonally Brace for Safety.
  • BCMC Theme: “Ideas to Build On.” The BCMC Committee decides the show must go on in spite of 9/11 terrorist attacks.
  • Hall of Fame Inductee: Bernard (Bernie) Boilen of Bemax - Inducted for his outstanding contribution to the industry. He was a pioneer in supplying low cost connector plates, unbundled from engineering. (in-house engineering)

2002:

  • TPI and WTCA agreed to divide responsibilities using a “litmus” test: If an item involves the design and quality of a single component and its individual chord member bracing, TPI will lead; if an item involves the manufacturing, sale, delivery and installation of components, WTCA will lead.
  • New TTBs are introduced: Fire Endurance Rated Truss Assemblies and Sprinkler Systems & Trusses.
  • New Quality Standard in the ANSI/TPI National Design Standard for Metal Plate Connected Wood Trusses is adopted.
  • WTCA released its Third Edition of the Metal Plate Connected Wood Truss Handbook.
  • Jobsite Safety Package was created.
  • Truss Knowledge Online (TKO) was created.
  • WTCA worked with the Carbeck Structural Components Institute (CSCI) and the Houston (TX) Fire Department (HFD) on the comprehensive educational program for CD for the fire service, The Wood Truss Industry & Fire Performance of Wood Trusses.
  • Habitat for Humanity set a new world record for the fastest home built in three hours, 26 minutes and 34 seconds. The project used roof trusses and wall panels.
  • BCMC Theme: “Building a New Tomorrow” in Columbus, OH. Numerous format changes enhance the BCMC experience for exhibitors and attendees: targeted educational sessions, free lunch for attendees and an improved show floor layout.
  • Hall of Fame Inductee: Koss Kinser, Kintec, LLC – Past president who was involved in establishing the need for a quality control program for component manufacturers.

2003:

  • WTCA Chapter Summits receive a face-lift and become the Regional Workshop and Conferences.
  • WTCA introduced TTW Online.
  • On April 30, the Florida truss regulation 61G15-31.003, "Design of Structures Utilizing Prefabricated Wood Trusses," took effect. It clarified the previous section of Florida law, added a cover or index sheet process that reduces the time and related expenses associated with truss design process in Florida. This change to the use of a concise cover sheet makes it quick and easy for building officials to find all of the project information they need to undertake plan review.
  • In-Plant WTCA QC Version 4.0 was released.
  • WTCA Operation Safety Certification was released.
  • The BCSI 1-03 booklet, Guide for Handling, Installing and Bracing of Metal Plate Connected Wood Trusses, was released at BCMC. It replaced TPI HIB-91 booklet and several other pre-existing WTCA and TPI publications.
  • BCMC Theme: “New Frontiers” in Phoenix, AZ. Farthest west BCMC travels since Las Vegas in 1987.
  • Hall of Fame Inductee: Merle Nett, Richco Industries - Nett served as both the Wisconsin Truss Manufacturers Association president as well as the WTCA-National president, and has been a big advocate of WTCA in Wisconsin. During his tenure as WTCA president, Nett was especially instrumental in working on the implementation process of the ANSI-TPI 1-95 Design Standard and WTCA’s In Plant WTCA QC Quality Control program. He also received Diamond Level recognition in WTCA’s Top Chord Club.

2004:

  • Dick Bowman, a long-time advertising sales person for SBC Magazine, passed away at the age of 73.
  • WTCA’s Technical Assessment Test Online (TATO) was released.
  • WTCA publications can now be ordered online.
  • WTCA and TPI signed a Joint Publications Agreement.
  • WTCA and TPI release the Building Component Safety Information Summary Sheets (B-Series).
  • TATO 2 became available.
  • Pocket QC was introduced.
  • Bernard Boilen passed away at the age of 83. He was a pioneer in producing and supplying low cost connector plate, unbundled from engineering. He was WTCA Hall of Fame inductee in 2001.
  • Phil Luneack (Bear Truss) died at the age of 53. He served as the President of the Michigan Chapter of WTCA for five years.
  • The Truss Plate Institute, Inc. (TPI) appointed Michael A. Cassidy as the association’s new Executive Director.
  • BCMC Theme: “Revvin’ Up the Component Industry” in Charlotte, NC. Record number of new exhibitors: 30.
  • Hall of Fame Inductee: Richard Brown, Truss Systems - Elected to the Board of Directors of WTCA in 1994, WTCA President in 1999, served on the BCMC Committee, served as the Membership Committee Chair in 1996 and 1997, and earned status as a Top Chord Club Diamond member for recruiting 25 members throughout his career.
  • Hall of Fame Inductee: Andy Schwitter, Truswal Systems Corporation - Served on the WTCA Board of Directors from 1993-1996 and then from 2001 to 2003. He served on both the BCMC Committee and the WTCA Marketing Committee.

2005:

  • WTCA member Schuck & Sons Construction Co., Inc. of Glendale, AZ, was selected to be showcased in Terry Bradshaw’s “Winners Circle,” which appeared on National TV on February 2. The segment was produced by Broadcast News Corporation.
  • A coversheet with warning language was added to the JOBSITE PACKAGE.
  • Kirk Grundahl, P.E. was appointed to occupy a committee seat in the International Building Code’s (IBC) Structural Committee for the International Code Council (ICC).
  • WTCA Work Force Development (WFD) Portal, an online employment clearinghouse, became available for WTCA component manufacturer members.
  • WTCA released Operation Safety in Spanish.
  • Long Span Truss Installation is added to the TTB Series.
  • WTCA and TPI unveil the new Jobsite Tags.
  • WTCA introduced The Load Guide (TLG), v1.00 Beta, a Guide to Good Practice for Specifying & Applying Loads to Structural Building Components.
  • BCMC registrations became available online.
  • The Minnesota Truss Manufacturers Association (MTMA) became a chapter of WTCA.
  • The Western Component Manufacturers Association (WCMA) became a chapter of WTCA.
  • WTCA redesigned its website.
  • Ronnie Wrightpassed away at the age of 67. He was known for his innovative heavy-duty roller presses. He was committed to quality and durability.
  • The 2005 edition of the National Design Specification for Wood Construction ANSI/AF&PA NDS-2005 was released.
  • The free online Guide to Good Practice for Specifying & Applying Loads to Structural Building Components (The Load Guide [TLG]) became available for download.
  • WTCA became a member of the American Legislative Exchange Council (ALEC).
  • Cal Jureit (inventor of the Gang-Nail connector plate) passed away at the age of 87. He assisted in the development of TPI and held over 60 patents throughout his lifetime.
  • WTCA helped NAHB-RC develop the Certified Trade Contractor Program, the first such program to develop quality assurance standards for the framing industry.
  • Robert Mort passed away at the age of 84. He was a founding member of the Truss Plate Institute (TPI) and the Component Manufacturers Council (CMC). He served two terms as president of TPI (1977 and 1991).
  • WTCA introduced the new Design Tools CD.
  • WTCA introduced its new Truss Technology Workshop (TTW) website.
  • BCMC celebrated its 25th Anniversary with a record breaking show. Held in Milwaukee, WI on October 12-14, the theme was “Riding on Tradition and Innovation.” This year’s show set another record for exhibit space size, allowing 2662 attendees and exhibitor personnel to traverse a 90,600 square foot show floor filled with educational, technical and manufacturing possibilities shown by the 155 exhibiting companies.
  • Hall of Fame Inductee: Suzanne (Suzi) Grundahl, Qualtim, Inc. and Managing Director of WTCA - She has provided management services to WTCA since 1992, and worked with Qualtim and WTCA since 1995. She was promoted to the position of WTCA’s Managing Director in 2000. She was inducted for her the key roles she has played in developing the staff and structure that has supported WTCA’s growth and evolution.
  • Bowman Industry Enthusiast Award Recipient: Mike Bugbee, Simpson Strong-Tie - Received the first annual Dick Bowman Industry Enthusiast Award, which honors an individual from a WTCA supplier member company who, over the years, has supported BCMC and the structural building components industry with enthusiasm and integrity in an unselfish and positive manner. The award is named in honor of the late Dick Bowman, a long-time BCMC and SBC Magazine salesman, whose enthusiasm and support of the component industry epitomized the views and goals of the industry. Mike was selected for his enthusiasm, integrity, positive attitude and all-around joy for BCMC and WTCA.

2006:

  • Crane Use & Proper Truss Handling was added to the TTB series.
  • The Board changed the association’s name from “Wood Truss Council of America” to “WTCA – Representing the Structural Building Components Industry.”
  • On April 24, WTCA was pleased to receive a letter from the International Codes Council asking Executive Director Kirk Grundahl to serve on the International Building Code (IBC) Structural Committee from July 1, 2006 to December 31, 2007. Grundahl also served on this committee for the 2005/2006 Code Development Cycle.
  • WTCA Technical Notes are introduced. The goal of Tech Notes is to clarify code issues and help educate the marketplace for structural building component manufacturers. Developed in partnership with WTCA chapters, Tech Notes address pertinent issues and offer peer- reviewed position statements to some frequently asked questions that component manufacturers face on a daily basis.
  • CSCI released the new Wood Truss Construction and Fire Performance CD.
  • WTCA announced the formation of its Cold Formed Steel Council (CFSC). Comprised of steel component manufacturer members of WTCA, CFSC will focus on protecting and advancing the structural building component industry with a special emphasis on steel component manufacturing issues.
  • WTCA Management Notes were introduced. Management Notes address critical issues that component manufacturers face in the operation of their business and are designed to help manufacturers educate regulatory groups and other outside entities in the marketplace on the industry’s interpretation of regulations, laws and codes.
  • Online Risk and Liability Management (ORisk) was released. Developed by WTCA Legal Counsel Kent Pagel, the program is a comprehensive program designed specifically for component manufacturers.
  • WTCA launched TTT recertification online.
  • WTCA unveiled the new Structural Component Operations Reaching for Excellence (SCORE) program. SCORE exists to give component manufacturers a way to show both their customers and other industry professionals how committed they are to continuous improvement within their companies, as well as to assist members by providing them with tools they can use to create and/or improve their own strategic marketing plans. Certified companies have embraced programs intended to help them continually improve and provide enhanced value to their customers. Achieving SCORE certification communicates an internal commitment to continual education and ever-increasing professionalism.
  • The new research and testing facility broke ground in November 2006, and the 5,730 square-foot facility is scheduled to officially begin calibrating testing equipment in June of 2007. Plans are already underway for several full-scale testing projects that will mark the inauguration of the testing facility.
  • On November 2, UBC Timber Roots in New Hampton, IA became the 100th certified user of In-Plant WTCA QC, a program developed by WTCA to help truss manufacturers manage the quality of the trusses they produce.
  • WTCA announced the latest addition to its online catalog: the Wood Design Package of the National Design Specification for Wood Construction ANSI/AF&PA NDS-2005.
  • WTCA and TPI introduced the 2006 edition of Building Component Safety Information (BCSI): Guide to Good Practice for Handling, Installing, Restraining & Bracing of Metal Plate Connected Wood Trusses. A new and improved guide for jobsite safety and truss performance, the 2006 edition replaces BCSI 1-03.
  • WTCA introduced The Load Guide (TLG), v1.02 Beta, a Guide to Good Practice for Specifying & Applying Loads to Structural Building Components. In addition to a large number of general improvements, TLG v1.02 added code requirements from the International Building Code (IBC) 2006 and International Residential Code (IRC) 2006, along with loading requirements from ASCE 7-05, Minimum Design Loads for Buildings and Other Structures. 
  • BCMC Theme: “Bigger and Better in Texas” in Houston, TX.
  • Hall of Fame Inductee: John E. Meeks, P.E., past president of the Truss Plate Institute (TPI) - Inducted for the all the work he’s done to encourage safe installation of trusses in the field, specifically in the area of bracing. He has been involved in the industry since the 1960’s and served as both Chairman of TPI’s Technical Advisory Committee (TAC) and president of the organization. He was involved in the evolution of the Metal Plate Connected Wood Truss design standard and helped with the 2007 revision.
  • Hall of Fame Inductee: Kent Pagel, Pagel, Davis and Hill, P.C. - He became WTCA’s legal counsel in 1984 and was the original author and member of the consensus committee for the development of ANSI TPI 1-1995, WTCA’s first Design Responsibilities document. He is a contributor to SBC Magazine, leads seminars on risk management, and helped create the Online Risk and Liability Management (ORisk) program to help members learn how to better protect their companies and assets.
  • SBC Leadership Award Recipient: Abner Yoder, Stark Truss Company - Received the first annual SBC Industry Leadership Award. The award was established to honor individuals who have helped nurture, support and grow the structural building components industry as a whole with their vision, innovation and creativity. Recipients may be component manufacturers, suppliers, associates or anyone else whose efforts have helped to make the industry into what it is today. He was an innovator and developer of new industry ideas for over 40 years, as well as a believer in life being about the people and lives you touch, and not about what you own or the money you have.
  • Bowman Industry Enthusiast Award Recipient: Tom Manenti, MiTek Industries, Inc. - Received the Bowman Award for his service to the industry. He has served as BCMC Committee Chair several times, served on WTCA’s Board of Directors and WTCA Marketing and Legislative Committees.

2007:

  • WTCA introduced the latest addition to its Operation Safety Program, the WTCA Forklift Certification Program. The Forklift Certification Program is a dynamic training program that is specific to the structural building components industry.
  • As of January 16, 2007, Carter-Lee Building Components became the first official SCORE-certified company. Carter-Lee, which is based in Mooresville, IN, has achieved SCORE Leader status and identified itself as a company that strives for excellence.
  • On February 2, WTCA was accepted as an Associate Member of the ASCE 7 Main Committee for the 2010 revision cycle of the standard. Ryan Dexter, P.E., WTCA’s Director of Technical Projects, will represent the association on this committee. WTCA will now have a direct voice in the development of the 2010 edition.
  • In an effort to maximize the visibility of the building components and supply industries on the federal level, WTCA—Representing the Structural Building Components Industry (WTCA) and the National Lumber and Building Material Dealers Association (NLBMDA) partnered together during their annual legislative conferences in Washington, D.C. on April 16-18.
  • Through FBMA and WTCA, component manufacturers in Florida join forces to donate components to the expansion of the Give Kids the World Village.
  • On May 9, WTCA’s Cold Formed Steel Council (CFSC) launched its first online assessment tool for the cold formed steel industry entitled Cold Formed Steel Technical Assessment Test Online (CFSTATO).
  • The Structural Building Components Research Institute hosts an open house at the grand opening of the testing facility in July.
  • As of July 19, 2007, Shelter Systems Limited became the first company to be SCORE-certified at the Elite level. Shelter Systems Limited, which is based in Westminster, MD, had previously achieved SCORE Leader status, and has worked hard to identify itself as a company that strives for excellence.
  • WTCA releases the TRUCK Program- Industry Best Practices. It is a fleet management and safety program designed to train drivers about their responsibilities on the road and at the jobsite.
  • WTCA’s Cold-Formed Steel Council (CFSC) introduced a new product line, sticker tags for cold-formed steel structural building components.
  • WTCA created the Professional Leadership Academy (PLA) and a partnership with The Randall Wade Group, LLC (RwG) to deliver program content to its membership.
  • WTCA restructures it's Truss Technology Workshops (TTW) to increase usage and reach a broader audience.
  • BCMC Theme: "Discovering New Possibilities" in Columbus, OH.
  • Hall of Fame Inductee: Mike Ruede, Woodinville Lumber, Inc. - Inducted for his tireless dedication to the industry. His endeavors include service on all of the committees, work with TPI on the joint venture agreement, initiating the Truss Technician Program, WTCA Presidency in 2002 and being a key force in the Florida Truss and Component Manufacturers Association (FTCMA).
  • SBC Leadership Award Recipient: Charlie Vacarro, Alpine Engineered Products (now part of ITW Building Components Group) - Received the award for the positive impact he had on the lives and careers of many industry individuals through sharing his knowledge and education. He also played a part in publishing “The Builders Guide to Trusses.”
  • Bowman Industry Enthusiast Award Recipient: Jim (JP) Pruitt, national exposition service contractor George E. Fern Company - Received the award posthumously. He was chosen for the profound effect he had on the BCMC Committee, exhibitors and staff during the 15 years he was the show’s account executive. He played an integral role in shaping BCMC into the spectacular tradeshow that it is today.

The information provided here has been obtained by SBCA from sources it believes to be reliable. However, neither SBCA nor its members guarantees the accuracy or completeness of any information published. Neither SBCA nor its members shall be responsible for any errors or omissions or for damages of any kind arising out of or related to the use of the information contained herein. This website is published with the understanding that SBCA and the contributing authors are supplying information, but are not attempting to render engineering or other professional services. If such services are required, the assistance of an appropriate professional should be sought