Search
Article
2006 May
- 38 percent of survey respondents indicated they attend BCMC to exchange ideas with other manufacturers.
- Many manufacturers take ideas from BCMC home and determine how they can be implemented.
Article
2006 May
- Toe-nailing has long been recognized in building codes as an acceptable means of attaching wood members to wood bearing walls.
- WTCA has submitted a code change proposal to the IRC regarding the truss-to-wall connection requirements.
Article
2006 May
- SNCMA joined forced with the Struc-tural Engineers Association of Southern Nevada (SEASoN) by forming a truss committee within the engineers’ group.
- Using teamwork, the two groups successfully resolved issues surrounding drag loads and uplift.
- Most recently, SNCMA and WTCA staff provided content for SEASoN’s design responsibilities document based on language in WTCA/TPI 1 Chapter 2.
Article
2006 May
- This issue of SBC Magazine is devoted to design and engineering advancements.
- The cover story highlights a design challenge that Pioneer Truss couldn’t pass up. Though the structure was small, the effort it took to design and build the trusses with ultimate precision for it was not.
- In February, BMC West graciously welcomed members of the fire service to its facility in the Portland area. Atten-dees seemed most impressed with the truss design software and the overall level of professionalism displayed during the tour.
Article
2006 May
- Most youth are unaware of careers in the truss manufacturing industry.
- Raising awareness about your company locally can bolster market share and promote employment opportunities.
- Consider becoming involved in builder trade shows and career expos to showcase products and employment opportunities.
Article
2006 May
- BCSI 1-03 booklet will soon be revised. Individual B-Series summary sheets will then undergo updates based on booklet changes.
- The new version will be reformatted into an 8.5x11-inch spiral-bound three hole-punched booklet. q The most significant changes will occur in BCSI’s two bracing sections, B2 on temporary bracing and B3 on permanent bracing.
- A change in permanent bracing perspective was developed when WTCA worked with the National Council of Structural Engineers Association on a code change proposal for the IBC 2006.
Article
2006 May
- Studies conducted on manual component saws, once the standard of the industry, found that operators were spending more time doing the manual set-ups than they were cutting wood.
- Almost anything you can automate will likely be an improvement over the manual production method you are currently using. The average saw operator will do three to four hundred set-ups per shift with an automated saw.
- It doesn’t do any good to have a saw that sets up in seven seconds if it takes much longer than that to get the wood moving through the saw.
Article
2006 May
- This event is one example of WTCA’s work to provide solid technical education on the fire performance of trusses.
- The goal of the tour was to listen to the concerns of the fire service about structural building components in modern building construction.
- The fire service was very impressed with the level of sophistication programmed into the truss design software, asking questions about how it could be integrated into the pre-fire planning process.
Article
2006 May
- John Meeks began his post-military car-eer in the commercial concrete industry.
- Meeks met Gang-Nail’s Cal Jureit in Florida, and joined Automated Building Components, Inc. as the Engineering Manager in charge of building franchise chains.
- He became involved in truss design engineering at ABC, and also took an interest in bracing and installation while inspecting a truss collapse.
- Throughout his career and still today, Meeks has made his mark on the wood truss industry as a respected forensic engineer.
Article
2006 May
- Imagine taking a horizontal slice of a hard-boiled egg and looking at it from the top. Now imagine designing roof trusses to fit on top of that shape and completing the job within budget.
- Pioneer came up with the idea of drawing the trusses first in CAD to represent the roof in true 3D.
- Paul Lenauer credited technology with making this project possible, while the project’s architect credits structural building components with helping make his vision a reality.
Article
2006 May
- Back in the ‘80s, truss technicians had to input the lengths, bearing locations and any concentrated loads on a truss other than a standard truss.
- Today’s truss design software helps streamline truss technicians’ work, but fundamental design, engineering and building code concepts are still important.
- Design technology gives us the capability to take designs to the next level and spec in a wide range of products from wall panels to steel trusses.
- The time has come to embrace all structural building component materials.
Article
2006 May
- Chainsaws are powerful; according to Lowe’s, "you won’t find a tool with more power per inch."
- Chainsaws were designed to cut only wood, so make sure that all other objects are cleared from the area before using them.
Article
2006 May
- BCSI-B2 provides temporary bracing guidance for trusses spaced up to 24 inches on-center.
- BCSI-B10 offers temporary bracing guidance for wide on-center trusses such as those used in post frame buildings.
- Truss Designers note on Truss Design Drawings that truss top chords must be laterally braced by the roof sheathing to prevent the top chord from buckling.
- When purlins are specified, check with the Truss Designer to determine the maximum unbraced length of the top chord between purlins to avoid top chord buckling.