Search
This Research Report provides construction details for residential deck ledger attachment to metal plate connected wood truss floor systems. Proper attachment of the deck ledger to the house is critical for ensuring that an “attached” deck is safely and securely supported at this location.
This presentation shows how code compliant use of MPCWT to support brick veneer can be accomplished and can be applied to many different situations utilizing MPCWT’s.
To download the full presentation, choose a link below.
2012 International Residential Code
Chapter 5 Floors (search for R501.3)
This presentation provides information on and requirements for the use of metal channel to meet lateral restraint/bracing requirements for metal plate connected wood trusses.
To download the full presentation, choose a link below.
The truss industry is currently employing ASCE as its source for the loading of live loads to the bottom chord of trusses for uninhabitable attics, in accordance with the International Residential Code and the International Building Code. However, there currently is a discrepancy between ASCE 7, the IBC and the IRC. This report examines the discrepancy and the correct loading for proper truss design.
QUALITY Speaks for Itself
Listed below are Frequently Asked Questions (FAQs) about SBCA In-Plant Wood Truss QC and SBCA’s Certification program. If you have any questions that were not addressed above, please contact SBCA staff.
Controlling sound transmission in buildings through wall, floor and ceiling assemblies is important for the comfort level and enjoyment of building occupants as they live, work and play in these buildings. This report aims to explore the methods one can use to reduce sound transmission in assemblies constructed with wood trusses.
“The sooner a project is completed, the sooner it can be sold or leased. That’s a real opportunity cost that means something to owners when I sell them on using our products.” Ken Cloyd, chairman of the board of California TrusFrame, said this to me a few years back during an interview for an article focused on innovation in the industry.
The SBCA chapter presidents recently discussed the state of SBCA chapters. We have many strong, active chapters with a great deal of participation. We also have chapters that lack consistent participation, which makes chapter leadership a challenge.
A little up-front effort can have significant downstream effects.
Meet SBCA's incoming secretary: Greg Griggs, Senior Vice President, Manufacturing – East for Builders FirstSource.
Construction of the SBCRI testing facility was no simple matter. Building permits were a challenge to obtain, elevator and stair requirements were unique due to the expectation of moving large materials and equipment, and the floors needed to be extra strong to support full-assembly and 200-pound-per-square-foot (i.e., high-force) testing.
To save you time and money, SBCA’s Wood Truss QC Program staff are going from on-site to on-call.
This presentation provides information on recent fire testing of floor systems in an effort to discuss 2012 IRC Section R501.3 and 2015 IRC Section R302.13 and the use of gypsum wallboard in single membrane floor protection.
To download the full presentation, choose a link below.
Two stories recently appearing in ProPublica spotlight widespread campaigns by the homebuilding industry that successfully eliminated or prevented requirements for home fire sprinklers.
Work at a handful of construction sites in Minneapolis and the west metro have slowed after tests show the wood is not fire compliant.