Search
Mold can be found almost anywhere and can grow on virtually any substance, provided moisture is present. Several lumber associations are knowledgeable on this topic, including the American Forest & Paper Association's (AF&PA’s) American Wood Council (AWC), the Western Wood Products Association (WWPA), the Canadian Wood Council (CWC), and the Southern Pine Council (SPC). Surface molds, which can come from a variety of sources including airborne spores, feed off of the sugars and starches readily available in wood. Thus mold can and will occur naturally on lumber under certain conditions, normally due to the presence of moisture in or on the wood and warm temperatures. Therefore, component manufacturers and lumber dealers must realize that all lumber and wood components are susceptible to mold growth.
Mold contamination is becoming a nationwide concern among homeowners and builders. Mold in homes and mold lawsuits have gained extensive media coverage from talk shows to feature articles in national publications. Even Erin Brockovich is making news in the mold litigation arena. Insurance companies are becoming increasingly concerned as well. They feel that they are unfairly bearing the brunt of the expense in remediating mold, thereby leading to revisions in homeowner and builder/contractor liability policies.
Builder complaints regarding the growth of surface mold on the lumber contained within wood structural components, while not as frequently encountered as in the past, continue to pose a dilemma in some markets. The dilemma comes in the form of builders either demanding moldfree wood based products, or when mold appears on a component at the jobsite, they are demanding that suppliers provide an immediate remediation (e.g., removal) of the mold, regardless of the cause or the cost. And, where structures are improperly designed or constructed and mold growth appears years later, component manufacturers (CMs) have found themselves into construction defect litigation with various types of complaints being asserted.
The below article is an update of the article, "Who's Mold Is It?" published in the January/February 2003 edition of SBC Magazine.