Search
Did you mean: panels?
Article
2006 December
- The 2006 IRC changes that apply to roof framing or roof trusses include: R301.5 attic loading; R802.10.2.1 snow loading; R802.10.3/R502.11.2 reference to BCSI; R802.3.1 rafter/ceiling joist connections; and R806.4 conditioned attic spaces.
- The 2006 IRC changes that apply to wall panels include: R302, R309 exterior wall; R317 unit separation; R502.2.1 load path through floor at braced wall lines; R602.3.2 wall plate splices; R602.10 braced wall lines; and R703 exterior wall covering and fasteners.
Article
2006 May
- Back in the ‘80s, truss technicians had to input the lengths, bearing locations and any concentrated loads on a truss other than a standard truss.
- Today’s truss design software helps streamline truss technicians’ work, but fundamental design, engineering and building code concepts are still important.
- Design technology gives us the capability to take designs to the next level and spec in a wide range of products from wall panels to steel trusses.
- The time has come to embrace all structural building component materials.
Article
2006 April
- Viking noted that in 2005, 66 percent of its wall panel system customers and 75 percent of its revenue could be directly tied to exhibiting at BCMC or advertising in SBC Magazine.
- Exhibitors can use the show to learn customer needs, improve their marketing plans, and fine-tune their products.
Article
2006 April
- East met West when Chinese Jiangsu Jifco Holdings went equipment shopping for a new truss and wall panel manufacturing facility in the U.S.
- Even though there were no skilled sawyers, operators, assemblers, or truss technicians available in China, Jay Halteman (Wood Truss Systems) was amazed at the Chinese’s capability and devotion to the project.
- For the new plant in China, Halteman chose what he believed to be the most reliable automated equipment that was also the easiest to operate and had extreme durability.
Article
2006 Jan/Feb
- In today’s market, wall design is generally performed using code prescribed tables and provisions.
- When a building of conventional construction contains structural elements exceeding the prescriptive code, these elements shall be designed in accordance with accepted engineering practice.
Article
2006 Jan/Feb
- This issue of SBC Magazine focuses on wall panel manufacturing.
- Two component manufacturers are featured in this issue: Blenker Building Sys-tems and Clearspan Components.
- Additional feature articles spotlight whole house design concepts as they relate to the building components industry.
Article
2006 Jan/Feb
- The first phase of a new study conducted by U. S. Department of Agriculture Forest Service Forest Products Laboratory and North Carolina State University revealed that wall panel manufacturers employ a higher degree of manufacturing technology than do modular home manufacturers.
- Phase 2 of the study will include time studies of wall panel manufacturing facilities.
Article
2006 Jan/Feb
- The founders of our industry are probably asking, "Where’s my truss industry?"
- We must continue to sell value in order to keep this industry strong.
- One of the only possible negatives to selling more engineering and integrated services is if component manufacturers begin to dilute the value of components by not "up-selling" the value provided.
Article
2006 Jan/Feb
- As wall panels gain popularity, questions pertaining to sealed engineering requirements have increased.
- Can walls built in the shop rely on the prescriptive provisions of the building code?
- In the future, it is possible that component manufacturers will be responsible for providing sealed design drawings for their wall panel designs.
Article
2006 Jan/Feb
- A little education can go a long way in showing framers the overall time, labor and material savings of wall panels.
- In order to make wall panels cost effective, the builder’s framer has to buy-in to the concept.
- It’s true, wall panels may not be a fit in every market, but there are many markets throughout the U.S. that have yet to realize the full potential of these components.
Article
2006 Jan/Feb
- Clearspan Components in Meridian, MS is one of the oldest wall panel manufacturers in the country, servicing the multi-family housing industry.
- The company embraces a culture of grassroots efficiency in its wall panel and roof and floor truss shops.
- A custom-built internal database organizes the company’s processes from sales to design to production to delivery to invoicing.
- The “finished goods identification and control system” addresses the issue of skilled labor on the jobsite.