Search
- Today’s complex truss designs can present significant installation challenges to framers if there isn’t good communication between the framer and the manufacturer.
- From storage and lifting pick points to critical bearing conditions, safe handling and installation practices need to be effectively communicated to installers.
- During the design phase, manufacturers can help ensure smooth installation by considering the framing challenges a complex design may create and facilitate cross communication between parties.
This flow chart has taken the informal approach of dealing with industry issues in the past and provided a framework that better delineates a process that any TPI or SBCA member can become engaged in.
- A series of test concepts have been suggested. SBCA needs your input on these concepts to ensure the industry testing conducted in SBCRI helps improve market opportunities for CMs.
- The goal of industry testing in SBCRI is to tackle the daily design and framing challenges CMs see, and find solutions that make components even more reliable and cost effective.
- SBCRI was developed and built specifically for this purpose.
Building Designers need to account for the dead and live loads of fire sprinkler systems, in addition to the other load requirements imposed under the model building codes. Truss Designers are responsible for incorporating the additional load from the fire sprinkler systems into the truss design. The information in this Research Report is applicable to both floor and roof systems. Only vertical loads from fire sprinkler systems are discussed; lateral loads, where required, should be evaluated separately by a Registered Design Professional.
Leading up to the March Open Quarterly Meeting (OQM) in Denver, the SBCA Executive Committee started working on an “Emerging Leader” initiative.
In March, SBCA undertook ASTM E119 floor assembly fire testing at NGC Testing Services in Buffalo, NY.
William “Al” James passed away at the age of 87 on February 26, 2015.
Truss industry standard of care items are contained throughout ANSI/TPI 1,* The National Standard for Metal Plate Connected Wood Truss Construction. The focus of this article is ANSI/TPI 1 Chapter 2, Section 2.3.5.1 and companion Section 2.4.5.1, which require a truss designer to prepare truss design drawings (TDD) based on design criteria and requirements set forth in the construction documents. The truss industry should expect to get this information from the building designer (BD), which may include the building owner, contractor or a registered design professional (RDP). Particularly when there is an RDP for the building, the design community expects the truss industry to design components that conform to the truss framing plan and specified design parameters within the construction documents, unless instructed otherwise in writing.
When it comes to getting the right structural building components for a project, cost isn’t everything, but how do you convince the building designer? Communication is key.
- There are many published installation guides available for product-specific applications, but few account for framing tolerances when dissimilar materials are integrated into the overall building and the expectations for overall performance.
- NFC’s Standards Development Sub-committee will begin outlining framing practices performed everyday where tolerances and known good performance have not been detailed in depth.
- The subcommittee will take a “through the eyes of a framer” point of view and provide step-by-step implementation guidelines and options.
- In order to illustrate how important it is to make connections, build friendships and, ultimately, reap the benefits of giving back, Rick shares his past experiences and influencers.
- Rick became the leader he is today through being led by others who had a long-term vision for the companies he was a part of, and for the industry as a whole.
- The SBCA Board is currently considering the development of an “Emerging Leaders” program to give our industry’s next generation of leaders an opportunity to begin networking with each other today.
In preparation for spring and another busy year, Jess Lohse suggests taking a look at your various "teams" and how they interact.
Usually, a picture is worth a thousand words, except when it is worth a million “ooohs” and “aaahs.”
A look at safe and proper handling and storage
SBCRI Testing & SBCA Research Reports can transform your market.
The first two Standard of Care articles discussed deferred submittals and truss-to-truss connections. This article explores truss minimum required bearing width issues from the perspective of the design community.
- You must have continuous training in order to have a training system work.
- In addition to FrameSAFE and Toolbox Talks, NFC will release FrameSAFE Safety Posters in early 2015.
- FrameSAFE is more than just a safety manual; we’ve created it to be a training tool that workers and employers can use to find everything they need in one product.
- A lot has changed in the components industry over the past two decades, and a new Framing the American Dream (FAD) project would allow us to quantify just how much, as well as detail our product’s benefits over other framing methods.
- Beyond FAD, SBCA is also focusing on helping component manufacturers across the country fight an unfair provision in the model building code, R501.3.
- As you think about investing in the future of your business, think about how much you’re willing to invest this year in these two projects to ensure a bright future for our industry.
What social networking websites do you use for professional purposes?
A total of 143 submissions have been received.
SBCA's Marketing Chair considers the place of social media and how it can enhance, but will never replace, the value of participation in your industry's trade association.
The theme for BCMC 2015 is Building Innovation, Framing Success. This year we are going to take a look back at the last 35 years of the BCMC show and highlight the ways it has enhanced the structural components industry’s ability to foster innovation throughout light-frame building construction. To do this right, we need your help.
While one of the most critical concerns in a manufacturing facility, machine guarding isn’t as simple or easy as it sounds.
Good truck drivers make good decisions.
Early in the new year is always a great time to make resolutions on how to improve your life (and your business). Here’s a look at five powerful things component manufacturers (CM) can resolve to do in 2015.
- When there’s no effective tie-off point for a building, framers have to use a job-specific best practices approach.
- Both Hull and Shifflett agree it is in the best interest of component manufacturers to work with framers to create best practice approaches to fall protection.
- The long-term goal is to host an online database that GCs and framing teams can visit to know who in their industry participates, trains and follows the same safety guidelines.
- Given how dependent we are on each other, you could argue our relationships with our suppliers are more important than any other.
- Respect and trust are qualities that separate our “go-to” suppliers from everyone else out there.
- Look up and down your supply chain and encourage the companies you respect and trust to participate either in SBCA OQMs or in chapter meetings.
- « first
- ‹ previous
- 1
- 2
- 3